| ¡¡ |
|
¨K
|
|
4¡¢Choices
for shooting mode and functional operation |
| 4.1
photo counter |
The Photo Cunter shows the number of photos taken:
|
 Continuously press the Functional
Mode Button until the counter flash. Press the shutter button, then,The
|
| number on the
counter shows the estimated number of photos that are available for use. |
| Press any button after that,the counter
will show the number of photos |
|
No action after that,the counter
will show number of photos again five seconds later. |
| 4.2
Indoor /Outdoor setting |
Initial setting is outdoor "
 ¡°condition. |
|
continuously press the Functional Mode Button,untill the icon "
"or "
 " flashes.Pressthe Shutter
|
|
Button to convert
indoor/outdoor condition. The selected indoor icon ""
or outdoor icon "" will show on |
| the LCD. |
|
4.3 Using flashlight |
Initial setting has flashlight " " disabled. |
|
Continuously press the
Functional Mode Button
untill the flashlight icon "" flashes on the
LCD |
|
Press the Shutter Botton to
confirm this mode; the icon" "will stop
flashing |
|
Flashlight will not start charging
until you press the Shutter Button once. A " tick" sound indicates
that |
| the camera begins
charging . |
|
After finishing charging,
two"tick"sounds will inform you the end of charging,and the flashlight
charging |
| indicator on the
back of camera will burn on,showing that the camera is ready for picture
taking. |
|
4.4 Erase current photo |
Continuously press the Functional
Mode Button,until icon"  " appears.
|
|
Press the Shutter
button to confirm this mode.The icon "
"will stop flashing. |
|
Press the Shutter Button 3
seconds after that,a tick sound will indicate that the photo has been crased. |
| Note:This function can not be used again until
you take another picture. |
|
4.5 Erase all photos |
Confinuously press the Functional
Mode Button,until the icons" " + "
 " flash. |
|
Press the Shutter Button to
confirm this mode.Then the icon" " + "
" will stop flashing. |
|
Press the Shutter Button 3 seconds
to erase all photos.The Photo Counter will show "000"and a tick |
| sound will
indicate the completion of photo erase. |
|
4.6 Self-timer |
Continuously press the Functional
Mode Button until the 10 seconds self-timer icon "
 " flashes |
Press the Shutter Button to
confirm this mode.Then the icon" " will stop
flashing. |
|
Press the Shutter Button
after that,self-timer starts.The indicator will flash 10 seconds(one tweet
and |
| one flash per
second). Ten seconds later, a long sound indicates the completion of
photographing. |
| Self-timer
function will be cancelled automatically at the end of photographing. Repeat
above steps to use |
| self-timer
function again. |
|
4.7 50Hz/60Hz conversion |
|
Intial setting is 50Hz " 50 Hz" |
|
Continuously press the Functional
Mode Button until "50" or"60" in the icon "50/60Hz" flashes. |
|
Then press the Shutter Button to
convert to 50Hz/60HZ |
| Noto:
The AC frequency in a country or region is either 50Hz or 60Hz.It is
|
| 50Hz
in China and European countries with the PAL TV system.It is 60Hz In |
| Japan and America Countries.Users need select
the proper frequency setting |
| according to the AC frequency of the
lighting.Wrong setting may lead to |
| blink of the photo in indoor environment. |
| 5¡¢Taking photos |
|
The digital camera adopts a lens
of fixed focus length.Focalizing is unnecessary.Before photographing, |
| you can preview
the scene through the optical viewfinder. |
|
Press the Shutter Button
when you wish to take a picture.The camera will make a tick sound when you
|
| touch the shutter
button after it is now ready to take pictures.Continuously hold the button
until you hear a |
| second tick
sound,which indicates the successful completion of photo taking.The photo
number will show |
| on the LCD after
releasing shutter button. |
|
If you touch the button by
mistake,the camera will make a low sound of "tick"after the first tick
sound, |
| indicating a
failed action. |
|
Continuous shot:rapid continuous
shots can be taken under compact storage modes("LQ+30" or"LQ+10 |
| Continuously hold
down the shutte botton with to gap.The camera enters the continuous
shot mode and |
| exits when the
button is released. |
|
If the lighting conding does not
fit for photographing.The camera will make a low sound to alarm the user |
| Notes:1¡¢Properly
select indoor/outdoor mode to adapt to the lighting condition so that the
camera reacts to |
| the intensity of
the illumination with proper setting.Wrong mode setting may lead to poor
photo quality or even |
| failure of photo
taking under a too dark or too bright condition.A failure is indicated by an
alarming sound. |
| 2¡¢Flashlight can
be turned on to compensate weak light when the light is too weak to take
photos under the |
| indoor mode. |
|
please continue:
page1 page2
page3 |
| ¡¡ |
